Sewing
Showing 57–68 of 68 results
-
Siruba 747-4-4 Needle Holder
Quick ViewThe Siruba 747-4-4 Needle Holder is a spare part that is a critical component of a serger or overlock sewing machine’s needle mechanism. It is responsible for holding the needles in place and controlling their movement during the stitching process.
The Needle Holder typically consists of a metal or plastic bracket that holds the needles securely in place. It is designed to guide the needles through the fabric at a consistent rate and prevent them from bending or breaking. The Needle Holder also typically contains a mechanism for adjusting the needle position, allowing the user to control the stitching tension.
If the Needle Holder becomes worn or damaged, it can cause the needles to be misaligned or fall out of the machine, resulting in poor-quality stitching or even machine damage. In such cases, it may be necessary to replace the Needle Holder with a new one.
-
Tension Post Dnl
Quick ViewThe tension post Dnl is a spare part that is a critical component of a sewing machine’s tension system. It is responsible for controlling the tension of the upper thread, ensuring that it feeds smoothly through the machine and forms high-quality stitches.
The tension post Dnl is typically made of metal and is designed to be durable and long-lasting. It is located near the top of the sewing machine and is connected to the tension discs and tension regulator.
When the tension post Dnl is properly adjusted, it maintains the correct level of tension on the upper thread, allowing it to feed smoothly through the machine without getting tangled or breaking. However, if the tension post Dnl becomes worn or damaged, it can cause the tension to become uneven or unstable, resulting in poor-quality stitching or even thread breakage.
-
Third Tension Asf
Quick ViewThe third tension asf is typically located on the bobbin case or shuttle hook assembly and is designed to ensure that the lower thread is fed smoothly through the machine and forms high-quality stitches. It works in conjunction with the upper tension system, which controls the tension of the upper thread.
When the third tension asf is properly adjusted, it maintains the correct level of tension on the lower thread, allowing it to feed smoothly through the machine and create even and consistent stitches. However, if the third tension asf becomes worn or damaged, it can cause the tension to become uneven or unstable, resulting in poor-quality stitching or even thread breakage.
Replacing the third tension asf with a new one is a straightforward process and can help to restore optimal performance to a sewing machine’s tension system. It is important to select the correct third tension asf that matches the make and model of the sewing machine, as well as to properly calibrate the tension system after installation to ensure that it is working correctly.
-
Thread Kinfe
Quick ViewThe Thread Knife is a spare part that is found on some sewing machines and is used to cut the thread after a seam has been sewn. It is typically located near the needle and works by sliding over the edge of the fabric to trim the thread.
The Thread Knife is typically made of metal and is designed to be durable and long-lasting. It is usually adjustable, so that it can be positioned at the correct distance from the needle to ensure that the thread is cut cleanly and at the right length.
If the Thread Knife becomes dull or damaged, it can result in ragged or uneven thread ends, which can be unsightly and may even cause the thread to become tangled or break. In such cases, it may be necessary to replace the Thread Knife with a new one.
-
Thread Kinfe
Quick ViewThe Thread Knife is a spare part that is found on some sewing machines and is used to cut the thread after a seam has been sewn. It is typically located near the needle and works by sliding over the edge of the fabric to trim the thread.
The Thread Knife is typically made of metal and is designed to be durable and long-lasting. It is usually adjustable, so that it can be positioned at the correct distance from the needle to ensure that the thread is cut cleanly and at the right length.
If the Thread Knife becomes dull or damaged, it can result in ragged or uneven thread ends, which can be unsightly and may even cause the thread to become tangled or break. In such cases, it may be necessary to replace the Thread Knife with a new one.
-
Thread Knife FL
Quick ViewThe Thread Knife FL is a spare part for a sewing machine that is a critical component of the machine’s cutting mechanism. It is responsible for trimming excess thread or fabric from the edge of the fabric after stitching.
The Thread Knife FL typically consists of a sharp metal blade that is positioned next to the fabric being stitched. It is designed to move up and down in synchronization with the needle to trim excess thread or fabric from the edge of the fabric.
If the Thread Knife FL becomes dull or damaged, it can cause the machine to produce poor-quality or incomplete stitches or fail to trim the excess thread or fabric. In such cases, it may be necessary to replace the Thread Knife FL with a new one.
-
Thread Knife FL
Quick ViewThe Thread Knife FL is a spare part for a sewing machine that is a critical component of the machine’s cutting mechanism. It is responsible for trimming excess thread or fabric from the edge of the fabric after stitching.
The Thread Knife FL typically consists of a sharp metal blade that is positioned next to the fabric being stitched. It is designed to move up and down in synchronization with the needle to trim excess thread or fabric from the edge of the fabric.
If the Thread Knife FL becomes dull or damaged, it can cause the machine to produce poor-quality or incomplete stitches or fail to trim the excess thread or fabric. In such cases, it may be necessary to replace the Thread Knife FL with a new one.
-
Thread Tension Assembly For Juki Sewing Machine
Quick ViewMaterial: Made With Durable Steel and High-quality Metal
Brand: Imported
Complete Set Included
Tension Disk:
Tension Spring
Tension Adjustment Dial/Knob
Tension Release Lever
-
Yamato Feed Dog For Chain Stitch Machine
Quick View- Specifically design for Yamato chain stitch machine.
- Available in various measures 2mm, 4mm, 5mm, & 6mm.
- Made with high-quality material to long term use.
-
Yamato-FD-62-4-6-5-2mm
Quick ViewThe Yamato-FD-62-4-6-5-2mm is a spare part for a sewing machine that refers to a specific type of feed dog. A feed dog is a component of a sewing machine that helps to move the fabric forward while stitching, creating a consistent stitch length.
The Yamato-FD-62-4-6-5-2mm feed dog is designed to work with a specific model of Yamato sewing machine and has specific measurements of 4mm, 6mm, 5mm, and 2mm. The measurements refer to the distance between the teeth on the feed dog, which can affect the speed and precision of the machine’s stitching.
If the feed dog becomes damaged or worn out, it can cause the sewing machine to produce poor quality stitches or fail to move the fabric forward properly. In such cases, it may be necessary to replace the feed dog with a new one that matches the make and model of the sewing machine.
-
Yamato-FD-62-4-6-5-2mm
Quick ViewThe Yamato-FD-62-4-6-5-2mm is a spare part for a sewing machine that refers to a specific type of feed dog. A feed dog is a component of a sewing machine that helps to move the fabric forward while stitching, creating a consistent stitch length.
The Yamato-FD-62-4-6-5-2mm feed dog is designed to work with a specific model of Yamato sewing machine and has specific measurements of 4mm, 6mm, 5mm, and 2mm. The measurements refer to the distance between the teeth on the feed dog, which can affect the speed and precision of the machine’s stitching.
If the feed dog becomes damaged or worn out, it can cause the sewing machine to produce poor quality stitches or fail to move the fabric forward properly. In such cases, it may be necessary to replace the feed dog with a new one that matches the make and model of the sewing machine.
